By lyuesword | 15 March 2022 | 0 Comments
Actual works of Making Grooves
The tools to make grooves are planes and chisels. The smith has several planes for different groove sizes.
Normal size groove
Making grooves on an Osoraku-zukrui tanto. Before that work, the blade has to be completely finished the shaping work with Arato stone.
Carve the body of groove with the plane.
Make the top of groove with the chisel.
The rever-se side of the plane and the steel shavings. The tip of the plane is a super hard alloy.
Then the grooves are smoothed and shaped up with stones. The smith says this work is harder than the rough carving with plane.
There are various sizes and shapes of stones.
Grind the stone frequently to keep its shape proper. Dull stones make the groove dull.
The grooves are running into the tang.
Want a unique sword? Feel free to contact us:
Email: lyuesword@hotmail.com
Website: www.lyuesword.com
Custom Sword Page: www.lyuesword.com/Custom-Sword/customization-options/Create-Your-Own-Swords
Normal size groove
Making grooves on an Osoraku-zukrui tanto. Before that work, the blade has to be completely finished the shaping work with Arato stone.
Carve the body of groove with the plane.
Make the top of groove with the chisel.
The rever-se side of the plane and the steel shavings. The tip of the plane is a super hard alloy.
Then the grooves are smoothed and shaped up with stones. The smith says this work is harder than the rough carving with plane.
There are various sizes and shapes of stones.
Grind the stone frequently to keep its shape proper. Dull stones make the groove dull.
The grooves are running into the tang.
Want a unique sword? Feel free to contact us:
Email: lyuesword@hotmail.com
Website: www.lyuesword.com
Custom Sword Page: www.lyuesword.com/Custom-Sword/customization-options/Create-Your-Own-Swords
Leave a Reply
Your email address will not be published.Required fields are marked. *