By lyuesword | 12 November 2020 | 1 Comments
Carbon Steel Compared with Other Types of Steel
According to the American Iron & Steel Institute (AISI), Steel can be categorized into four basic groups based on the chemical compositions: Carbon Steel, Alloy Steel, Stainless Steel, Tool Steel.
1. Carbon Steel
Carbon steel has become a popular material for use in the manufacturing industry. As the name suggests, it consists of steel along with a carbon alloy for enhanced properties. Carbon Steel can be segregated into three main categories: Low carbon steel (sometimes known as mild steel); Medium carbon steel; and High carbon steel.
Low Carbon Steel (Mild Steel): Typically contain 0.04% to 0.30% carbon content. This is one of the largest groups of Carbon Steel. It covers a great diversity of shapes; from Flat Sheet to Structural Beam. Depending on the desired properties needed, other ingredients are added or increased. For example: Drawing Quality (DQ) – The carbon level is kept low and Aluminum is added, and for Structural Steel the carbon level is higher and the manganese content is increased.
Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment.
High Carbon Steel: Commonly known as “carbon tool steel” it typically has a carbon range between 0.61% and 1.50%. High carbon steel is very difficult to cut, bend and weld. Once heat treated it becomes extremely hard and brittle.
2. Alloy Steel
Technically, every steel is an alloy, but not all of them have the “alloy steel” designation. To be called alloy steel, other ingredients must be intentionally added to the iron and carbon composition. A small percentage of alloying ingredients — typically, no more than 5% — is added to the mix, and these metals can improve corrosion resistance, machinability, and many other properties.
Alloy steel is a steel that has had small amounts of one or more alloying ingredients (other than carbon) such as such as manganese, silicon, nickel, titanium, copper, chromium and aluminum added. This produces specific properties that are not found in regular carbon steel. Alloy steels are workhorses of industry because of their economical cost, wide availability, ease of processing, and good mechanical properties. Alloy steels are generally more responsive to heat and mechanical treatments than carbon steels.
3. Stainless Steel
In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy with a minimum of 10.5% chromium content by mass.
Stainless steel also contains varying amounts of Carbon, Silicon and Manganese. Other ingredients such as Nickel and Molybdenum may be added to impart other useful properties such as enhanced formability and increased corrosion resistance.
4. Tool Steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion and deformation and their ability to hold a cutting edge at elevated temperatures. As a result tool steels are suited for their use in the shaping of other materials.
Want a unique sword? Feel free to contact us:
Email: lyuesword@hotmail.com
Website: www.lyuesword.com
Custom Sword Page: www.lyuesword.com/Custom-Sword/customization-options/Create-Your-Own-Swords
1. Carbon Steel
Carbon steel has become a popular material for use in the manufacturing industry. As the name suggests, it consists of steel along with a carbon alloy for enhanced properties. Carbon Steel can be segregated into three main categories: Low carbon steel (sometimes known as mild steel); Medium carbon steel; and High carbon steel.
Low Carbon Steel (Mild Steel): Typically contain 0.04% to 0.30% carbon content. This is one of the largest groups of Carbon Steel. It covers a great diversity of shapes; from Flat Sheet to Structural Beam. Depending on the desired properties needed, other ingredients are added or increased. For example: Drawing Quality (DQ) – The carbon level is kept low and Aluminum is added, and for Structural Steel the carbon level is higher and the manganese content is increased.
Medium Carbon Steel: Typically has a carbon range of 0.31% to 0.60%, and a manganese content ranging from .060% to 1.65%. This product is stronger than low carbon steel, and it is more difficult to form, weld and cut. Medium carbon steels are quite often hardened and tempered using heat treatment.
High Carbon Steel: Commonly known as “carbon tool steel” it typically has a carbon range between 0.61% and 1.50%. High carbon steel is very difficult to cut, bend and weld. Once heat treated it becomes extremely hard and brittle.
| PERCENT | STEEL | USE |
| 0.05 | Dead mild steel | Sheet and strip for the presswork, car bodies, tin-plate, wire, rod, and tubing |
| 0.08-0.15 | Mild steel | Sheet and strip for the presswork, wire and rod for nails, screws, concrete reinforcement bar |
| 0.15 | Mild steel | Case carburising quality |
| 0.1-0.3 | Mild steel | Steel plate and sections, for structural works |
| 0.25-0.4 | Medium carbon steel | Bright drawn bar |
| 0.3-0.45 | Medium carbon steel | Shafts and high-tensile tubing |
| 0.4-0.5 | Medium carbon steel | Shafts, gears, railway tyres |
| 0.55-0.65 | High carbon steel | Forging dies, railway rails, springs |
| 0.65-0.75 | High carbon steel | Hammers, saws, cylinder linings |
| 0.75-0.85 | High carbon steel | Cold chisels, forging die blocks |
| 0.85-0.95 | High carbon steel | Punches, shear blades, high-tensile wire |
| 0.95-1.1 | High carbon steel | Knives, axes, picks, screwing dies and taps, milling cutters |
| 1.1-1.4 | High carbon steel | Ball bearings, drills, wood cutting and metal cutting, tools, and razors |
2. Alloy Steel
Technically, every steel is an alloy, but not all of them have the “alloy steel” designation. To be called alloy steel, other ingredients must be intentionally added to the iron and carbon composition. A small percentage of alloying ingredients — typically, no more than 5% — is added to the mix, and these metals can improve corrosion resistance, machinability, and many other properties.
Alloy steel is a steel that has had small amounts of one or more alloying ingredients (other than carbon) such as such as manganese, silicon, nickel, titanium, copper, chromium and aluminum added. This produces specific properties that are not found in regular carbon steel. Alloy steels are workhorses of industry because of their economical cost, wide availability, ease of processing, and good mechanical properties. Alloy steels are generally more responsive to heat and mechanical treatments than carbon steels.
3. Stainless Steel
In metallurgy, stainless steel, also known as inox steel or inox from French inoxydable (inoxidizable), is a steel alloy with a minimum of 10.5% chromium content by mass.
Stainless steel also contains varying amounts of Carbon, Silicon and Manganese. Other ingredients such as Nickel and Molybdenum may be added to impart other useful properties such as enhanced formability and increased corrosion resistance.
4. Tool Steel
Tool steel refers to a variety of carbon and alloy steels that are particularly well-suited to be made into tools. Their suitability comes from their distinctive hardness, resistance to abrasion and deformation and their ability to hold a cutting edge at elevated temperatures. As a result tool steels are suited for their use in the shaping of other materials.
Want a unique sword? Feel free to contact us:
Email: lyuesword@hotmail.com
Website: www.lyuesword.com
Custom Sword Page: www.lyuesword.com/Custom-Sword/customization-options/Create-Your-Own-Swords
Recently Reviews
Read MoreLeave a Reply
Your email address will not be published.Required fields are marked. *